Use this machine to do jobs for which it has been
designed. Any other use could be dangerous to the
end user, for the machine and to other people, animals
and things that are nearby.
Verify that:
- The machine completely and look for loose parts
(screws, nuts, etc.) and damages.
- That the moving parts of the machine are not in
contact with any object.
- Ensure that the protector is well fixed to the
machine.
Press, repair or replace everything you need before
using the machine
Before start up, remove the security blade protector
from the blade.
5.3.2. START AND STOPPAGE
Start up of the machine:
Press the security button (1) and without letting go,
press the On/Off switch (2).
Stoppage of the machine:
Let go of the On/Off switch (2).
2
After stopping the machine, the blade will not
stop immediately. Wait until it has stopped before
carrying out any maintenance work on the machine
or before transporting the machine. The blades don't
stop immediately when releasing the on/off switch, the
blades stop within 0.5 seconds after.
5.3.3. CHECKING POINTS AFTER START UP
It is important to ensure that there are no loose
parts and to check the temperature of the machine.
If you detect anything strange, stop immediately and
check carefully. In case of any anomaly or problem
take the machine to your nearest service agent for
repair. Never carry on working if the machine does not
seem to work properly.
6. MACHINE USAGE
Use this machine only for jobs for which it has
been designed. The use of this machine for any other
jobs is dangerous and can cause dangers to the users
and/or to the machine.
Work only with good light. Do not use this machine at
night, with fog or with reduced visibility that does not
allow you to clearly see the working area.
Limit the usage of the machine to 10 minute stints
and rest for a further 10 to 20 minutes in between
sessions.
1
Avoid using the machine when the ground is wet or
humid. Be especially careful when using the machine
after it has rained as the ground will be slippery and
you could fall.
If you lose your stability or if you fall, let go of the On/
Off trigger straight away.
Do not use this machine when you are tired or under
33/124
English