Garland SET 353 FE Manuel D'instructions page 28

English
your nearest service dealer. Vibrations are always an
indication of a problem to the machine.
In case of a prolonged stoppage time, unplug the
machine from the mains.
2.5.1. BACK PULL
When the blades are functioning and they come into
contact with a solid object, a dangerous situation
could happen. This situation is called backlash. As a
result, the user can lose control over he hedge cutter
and the user could cut himself in a dangerous or
mortal way.
These forces occur due to an improper use of the
machine and/or because of the incorrect interpretation
of the instruction manual and can be avoided by
following these simple instructions:
1. There should not be posts, cables or rocks near the
blades so as to avoid backlash and its dangers as well
as to avoid damage to the blades.
2. During use the hedge cutter should be held only by
he handles.
3. Never lose eye contact with the machine.
4. When using he hedge cutter, never have the
machine near your feet or above your shoulders.
2.6. MAINTENANCE
Take your machine for periodic revision to a
qualified after sales dealer and only use original
spare parts and accessories. This will guarantee that
the security measures of this electris machine can
always be complied with.
28/124