EUROM LB2.5 Livret D'instructions page 17

The room is then sufficiently humid and further moisture could cause damage!
Description
Installation and Connection

Remove the packaging materials.

Check for any damage. If you have any doubts, do not use the device!

Make sure the humidifier is set to OFF and the plug is not inserted into the socket.

Place the humidifier on a sturdy, flat and horizontal surface, at least 60 cm above the floor
and 10 cm from the wall. Never place it on a bed or thick carpet; there is a ventilation
opening on the base of the device and this must be open at all times! We recommend that
you do not place the device on valuable or treasured items of furniture.
Note! If condensation forms on windows, walls, etc.
switch the humidifier off.
Note! Never block the air inlet or outlet!
17
1. Lid with moisture extractor
2. Tank
3. Water level sight glass
4. Air extractor
5. Tank cap
6. Water level sensor
7. On/Off button
8. Indicator light
9. Air inlet
10. Casing, with internal mechanism
11. Electric cable and plug