Publicité
Les langues disponibles
Les langues disponibles
components:
A
1
2
attach canopy:
1
x2
2
B
C
D
Pop 'n Jump
A
Canopy
B
Travel Bag
C
(replacement part # 13410-01)
Toys
D
assembly:
3
IMPORTANT: Check security of both locks before each use.
2
x2
Hint: Adjust canopy for maximum
coverage by gently pulling top of
canopy forward so top/sides are
fully extended!
Initial setting out of package is to the
1
lowest position. Place child in seat.
Check distance between child's feet and
oor. Child's toes should touch oor
(without bouncing). If child is standing at
footed or toes are not touching oor, adjust
height to any of the three positions (low for
smallest child and high for tallest child).
2
Remove child from seat before adjusting
height! Unlock 2 places, turn product upside
down, and rest on oor for easy adjustment.
FINISHED!
1
x4
adjust seat height:
LOW
3
Before adjusting height, release snaps on
x4
corners of fabric oor (snaps only needed in
low position)!
4
Adjust to desired height (low, middle,
high) by pressing lock pin fasteners
inward and adjusting frame!
IMPORTANT: Ensure lock pin fasteners
IMPORTANT: Before assembly and each use,
are properly engaged (8 places). All
inspect this product for damaged hardware,
fasteners must be adjusted to the same
loose joints, missing parts, or sharp edges. DO
position. Relock frame (2 places).
NOT use if any parts are missing or broken.
to store:
WARNING
NEVER adjust seat
while child is in product.
MIDDLE
HIGH
3
Publicité
