Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this
installation, it is recommended to have the installation completed by a mechanic. If you have any questions, please call our Technical Hotline
at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday.
•
DESCRIPTION: Edelbrock Performer series intake manifolds are designed for engines operating in the idle to 5500 rpm range. Performer
RPM and RPM Air-Gap series intake manifolds are designed for engines operating in the 1500-6500 rpm range. Match Performer or
Performer RPM intake manifolds with recommended carburetors and additional equipment for even greater performance increases.
APPLICATIONS:
INTAKE MANIFOLD
2105, 21053
7105, 71053, 71054
7505, 75054
A - Not legal for sale or use on pollution controlled motor vehicles.
B - Stock replacement/street legal in some applications. See "Stock Replacement Parts List for Intake Manifolds" insert, or Catalog for details.
C - Available in additional finishes, such as polished, PermaStar, or EnduraShine. See Catalog for details.
D - Aftermarket 4-bbl carburetors are not compatible with Ford AOD. Performer Series and Thunder Series AVS carbs will work with Ford AOD
when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com
EGR SYSTEMS: Edelbrock EGR-equipped Performer manifolds are intended as a direct functionally identical replacement for their O.E.M.
•
counterparts. All exhaust emissions or emissions related stock components are intended to be retained and functional. Non-EGR equipped
manifolds will not accept stock EGR (Exhaust Gas Recirculation) equipment. EGR systems are used on most 1972 and later model vehicles.
Check local laws for requirements.
ACCESSORIES & INSTALLATION ITEMS: Major recommendations are listed below. See our catalog for details. To order a catalog, call
•
(800) FUN-TEAM, or visit www.edelbrock.com.
CARBURETOR RECOMMENDATIONS:
•
Manifold 2105 and 21053 (Emissions Controlled Applications):
CARBURETOR
OEM
Manifold 2105 and 21053 (Non-Emissions):
CARBURETOR
Performer #1405 (600 cfm)
Performer #1406 (600 cfm)
Thunder Series #1805, (650 cfm)
Thunder Series #1806 (650 cfm)
©2013 Edelbrock LLC
Rev. 5/14/13 - QT/mc
®
Catalog #2105, 21053, 7105, 71053, 71054, 7505, 75054
REFERENCE
APPLICATION
Performer 390: Designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8s
B, C, D
with medium or low-rise cylinder heads. Will not accept stock Motorcraft spread-bore
carburetor or fit heavy-duty 361 & 391 c.i.d. Ford truck V8s. Not equipped with EGR
Performer RPM FE: Designed for high-performance 390-406-410-427-428 c.i.d. Ford
FE V8s with standard 390-428 c.i.d. low/medium-rise cylinder heads, or Edelbrock
A, C, D
Performer RPM FE cylinder heads. Has provision for adding PCV or breather flange at rear.
No exhaust crossover passage. Will not fit High-Riser or Tunnel Port engines.
RPM Air-Gap Dual-Quad FE: Designed for 1960-later high-performance street 390-406-
A, C, D
410-427-428 c.i.d. Ford FE engines with low/medium rise or Edelbrock Performer RPM
FE heads #60059 or 60069.
REFERENCE
PARTS REQUIRED FOR INSTALLATION
B, H, N
REFERENCE
A, I, K, N, O
A, I, K, N
A, I, K, N
A, I, K, N
Performer/RPM/Air-Gap Intake Manifolds
For 390-428 c.i.d. FE Ford Engines
PARTS REQUIRED FOR INSTALLATION
#1483 or 1844 throttle lever adapter
#1483 or 1844 throttle lever adapter
#1483 or 1844 throttle lever adapter
#1483 or 1844 throttle lever adapter
Catalog #2105, 21053, 7105, 71053, 71054, 7507, 75054
Page 1
INSTALLATION INSTRUCTIONS
Brochure #63-0275
Publicité
Manuels Connexes pour Edelbrock 2105
Sommaire des Matières pour Edelbrock 2105
- Page 1 • DESCRIPTION: Edelbrock Performer series intake manifolds are designed for engines operating in the idle to 5500 rpm range. Performer RPM and RPM Air-Gap series intake manifolds are designed for engines operating in the 1500-6500 rpm range. Match Performer or Performer RPM intake manifolds with recommended carburetors and additional equipment for even greater performance increases.
- Page 2 Edelbrock #7224 Port: 1.20” x 2.10”, .060” Thickness EGR 75054 NOTE: To ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used. BEFORE INSTALLING THE INTAKE MANIFOLD: Using a 3/8” Hex (Allen) wrench, install the supplied threaded water bypass tube into the •...
- Page 3 CAMSHAFT AND HEADERS: The Performer Series manifolds are compatible with aftermarket camshafts and headers designed to work in the idle-5500 rpm range. Edelbrock has developed a dyno-matched, street proven camshaft (#2106 for 352-428 c.i.d. engines) for use with Performer Series intake manifolds. Header primary tube diameter should be 1-5/8” - 1-3/4” (depending on engine displacement). Performer RPM Series manifolds are compatible with aftermarket camshafts and headers designed to work in the 1500-6500 rpm range.
- Page 4 Fully clean the cylinder head intake flanges and the engine block end seal surfaces. Apply Edelbrock Gasgacinch sealant P/N 9300 to both cylinder head flanges and to the cylinder head side of the gaskets, allow to air dry, and attach the intake gaskets.
- Page 5 • Las series de múltiples de admisión de Edelbrock Performer están diseñadas para motores que operan con la marcha en 5 500 rpm (revoluciones por minuto). Las series de múltiple de admisión Performer RPM están diseñadas para motores que operan con 1500-6500 rpm Ponga los múltipes de admisión de Performer o Performer RPM con carburadores recomendados y equipo adicional para aumentar aún...
- Page 6 Edelbrock #7224 Port: Grosor 3,05 cm x 5,33 cm / 1,52 cm 7505, 7504 NOTA: Para asegurar un máximo rendimiento y sello apropiado, los empques de Edelbrock que son especificamente diseñados y manufacturados para usarse con partes de Edelbrock. •...
- Page 7 Los múltiples de Series Performer RPM son compatible con los árboles de leva y los múltiples de escape tubular del mercado de repuestos diseñados para trabajar con la marcha en 1 500-6 500 rpm Edelbrock ha creado un árbol de leva con dino-igual probado en calle (#7106 para motores 390-428 c.i.d.) para usarse con múltiples de series Performer RPM (vea el catálago para detalles).
- Page 8 Limpie completamente las pestañas de admisión de las cabezas cilíndricas y las superficies del sello del cuadro del motor. Aplique el sellador de Edelbrock Gasgacinch No. 9300 en las pestañas del cilindro y a los lados de las cabezas cilíndricas de los empaques, déjelo que se seque y adhiera los empaques de admisión.
- Page 9 • Les collecteurs d’admission de la série Performer d’Edelbrock sont conçus pour les moteurs fonctionnant du ralenti à 5.500 tours/minute. Les collecteurs d’admission de la série Performer RPM sont conçus pour les moteurs fonctionnant de 1.500 à 6.500 tours/minute. Utilisez les collecteurs d’admission Performer et Performer RPM avec les carburateurs recommandés qui y correspondent et du matériel supplémentaire...
- Page 10 Edelbrock no.7224 Port: Grosor 3,05 cm x 5,33 cm / 1,52 cm 7505, 75054 NOTE : Pour s’assurer maximum exécution et un corret, le joints Edelbrock lequel sont en particulier concu et fabrique pour usage avec Edelbrock parties doit etré utilisé.
- Page 11 Le taux de compression doit être d’au moins 9,5 à 1 pour fonctionner correctement avec les arbres à cames Performer RPM. L’installation de nourrices ou d’arbres à cames aftermarket ou les deux avec un collecteur Edelbrock de série Performer RPM peut amaigrir le calibrage du carburateur.
- Page 12 • pour fonctionner à des vitesses allant du ralenti à 5.500 tours/minute. Edelbrock a mis au point un arbre à cames dynamiquement adapté et ayant fait ses preuves en rue (no. 2106 pour les moteurs 352-428 c.i.d.) pour les collecteurs d’admission de la série Performer. Le diamètre du tube de nourrice principal devrait être de 4,1 à...