Connecting Cables - Epson TM-L90 Manuel De L'utilisateur

English

Connecting Cables

To connect cables, first remove the bottom of
the cover as shown in the illustration.
To place cables, first break off by hand any of
the three portions indicated by circles in the
illustration (the other portion is on the right).
Then put the cables through the holes and
replace the bottom of the cover.
Cover Operation Label
If you use the cover operation label included in the package, attach it in one of the
following locations:
a) Side of the operation panel
b) Beside the power switch
c) Side of the printer
12 TM-L90 with Peeler User's Manual