Maintenance; Disassembly And Disposal - Zehnder CO2 RF Manuel D'utilisation

6. Maintenance

Regularly remove dust with a dry duster or
carefully with a vacuum cleaner.
Never clean the device with any
moisture.
Never use cleaning agents.
7. Disassembly and
disposal
If the CO Sensor is disassembled, the
2
waste disposal regulations applicable on-
site and at the time of disassembly must be
observed.
Dispose of the CO
mentally friendly way. Do not dispose of the
device together with household waste. The
CO Sensor can be handed in at a collection
2
point for electronic waste.
It is the responsibility of the owner
of the CO
device responsibly.
24 - EN
Sensor in an environ-
2
Sensor to dispose of the
2