Standby Clock; Network Wizard - LENCO DIR-140 Mode D'emploi


Back Light
6.1 Equaliser
Several predefined EQ settings are available; also a user-defined setting (My EQ). To choose an EQ
setting, select Menu > System settings > Equaliser. You can then choose from a variety of predefined
settings and My EQ. The last option 'My EQ profile setup' allows you to define your own settings for
the 'My EQ' option, with custom bass and treble settings.
6.2

Standby Clock

You can choose Anolog clock or Digital clock under standby mode.
6.3 Network


Network wizard


WPS setup

View settings

Manual settings

NetRemote PIN setup

Network profile

Clear network settings

Keep network connected
6.3.1 Network wizard
This guides you through the necessary steps to join a network. This is also automatically run as part
of the Setup wizard. The screens and options presented will depend on the type of network and
network protection used.
Selecting a network
When the Network wizard is chosen radio automatically scans for available wireless networks and
presents a list of SSID's (Service Set Identifier) for the networks. Radio remembers login details for
the last four wireless networks it has connected to and will automatically connect to them when
they are available. If connection to a network is temporarily lost, radio will automatically reconnect.
Wi-Fi network (SSID), select a network from the list.
Open network
If the network is open (non-encrypted), radio connects and no further details are required.
Standard encrypted network
If the wireless network is protected the next screen presents options to enter the network key or
passphrase.
Note: The default passphrase for most wireless routers is printed on a label on the router.
The radio connects to the selected network. If connecting fails,the radio returns to a previous screen
to try again. To exit the process use the Back/Menu button. If the network connection is lost, the
radio automatically reconnects.
13