Tips; Use - MAXXMEE 09690 Mode D'emploi

Digital Hot Air Oven

TIPS

• Generally it is not necessary to
preheat the device. However, for the
preparation of food which has to be
ready "on the dot", pre-heating is
recommended so that the exact time
when the food has been cooked can
be determined.
• For the preparation of frozen items,
please follow the time and temper-
ature specifi cations of the manufac-
turer.

USE

Please Note!
■
Do not use the device at low tem-
perature (e.g. Drying programme) for
longer than 72 hours without a break.
Do not use it at high temperatures for
longer than 4 hours without a break.
■
Do not operate the device for a
lengthy period without food.
■
Metal foil packaging or utensils may
not be placed in the device because
they may cause fi re or an electric
shock.
■
Do not place food that is still wrapped
in cling fi lm or plastic bags into the
device.
■
Make sure that the food does not
come into contact with the heating
elements of the device.
■
Make sure that foodstuffs containing
oil and fats are not overheated. Do
not place any vessels fi lled with oil or
other liquids into the device.
■
Never spray cold water onto the glass
door of the device during or imme-
diately after use. The glass might
shatter.
■
Do not leave the glass door open
while the device is in operation.
09690_Inlay_DE-EN-FR-NL_A5.indb 19 09690_Inlay_DE-EN-FR-NL_A5.indb 19
■
Do not place any heavy objects on
the open glass door or the device.
■
Always place the used accessory on a
heat-resistant surface after use.
■
Make sure that fat/oil dripping down
from food containing fat or oil does
not contaminate the bottom heating
elements. Always use the fat collect-
ing tray!
1. Get ready the food that is to be
prepared.
2. Select the right accessory (see the
"Accessories" chapter).
3. Place or skewer the food onto or into
the chosen accessory.
4. Slide the accessory into one of the
rails of the main unit (1) or insert the
rotating spit (5) (see the "Accessories"
chapter).
5. Close the glass door (10).
6. Select a preset programme and
manually adjust the settings if
necessary (see the "Functions"
chapter).
7. Touch the fi eld (k) to start
the heating process. The heating
indicator on the display (12) starts
(orange lighting) and for almost all
programmes the indicators
(c) can be seen on the display. The
device will start preheating.
With the BAGEL and TOAST
programmes only the display
(d) for the level of
browning is visible. The preheating is
omitted.
With the AIRFRY programme the
AIRFRY (b) display is also visible.
 
If only top and bottom heat is to
be used, touch the fi eld
switch off the recirculating air. The
indicator goes out.
If the recirculating air is to be
switched on again, touch the fi eld
again.
EN
(a) and
(g) to
19
08.02.2021 10:10:57 08.02.2021 10:10:57