Gartenmeister GM-HM 20 Mode D'emploi page 24

GB
ENGLISH
MAINTENANCE
DANGER!
Switch the appliance off and remove the contact
key before any adjustment, cleaning and
servicing work. Wait until all rotating parts have
stopped and the appliance has cooled down.
Keep hands away from all cutting edges and
moving parts. Fingers can be pulled into cutting
carriage and be cut or crushed.
After every work stint, clean the machine thoroughly
to remove all dust and debris, and repair or replace any
faulty parts.
Check the collection bag at regular intervals for any wear
and aging.
Clean the ejection opening and cover at regular intervals.
STORAGE
The appliance must be stored in a dry place and pro-
tected from frost.
Lock the device in a proper place to protect it from
unauthorised use.
FAILURE REMOVAL
Defect
The motor does not start
Unsteady running,
strong vibrations
Poor mowing/catching
performance
DISPOSAL
If your device should become useless somewhere
in the future or you do not need it any longer,
do not dispose of the device together with your
domestic refuse, but dispose of it in an environ-
mentally friendly manner.
22
Cause
Battery is empty
Battery is defective
Contact key is not inserted
Main switch or safety arch is not controlled
The angle of inclination of the handle is
outside the working area (27 ° - 63 °)
Blade is damaged
Blade is loose
Blade is blunt
Battery is defective
Mowing height adjustment not regulated
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp cloth
making.
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition;
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of
the user. The manufacturer will not be liable for any such
damage.
Please contact our service department if you need acces-
sories or spare parts.
Let the engine cool down, before you store the device in
a closed room.
Removal
Charge the battery
Contact customer service
Refer to the instructions in these operating
instructions.
Refer to the instructions in these operating
instructions.
The angle of inclination of the handle must
be inside the working area (27 ° - 63 °)
Replace the blade, Repairs and works
specified in these Instructions may only
be performed by qualified authorised
staff.
Check and tighten the blade clamping
Have the blade sharpened or replaced,
Repairs and works specified in these
Instructions may only be performed by
qualified authorised staff.
Contact customer service
Adjust the mowing height
Please dispose of the device itself at an according collec-
ting/recycling point. By doing so, plastic and metal parts
can be separated and recycled. Information concerning
the disposal of materials and devices are available from
your local administration.