Würth WLH 1.5 Traduction Des Instructions De Service D'origine page 5

GB
Please read and comply with
these operating instructions
prior to initial operation of
your device.
Keep these operating instructions for
later use or for a subsequent owner.
Intended use
The lamp is for illumination of a work area and
must only be used in a dry environment. The device
is designed for use with genuine Würth system
accessories.
Any other use or use beyond this scope is consid-
ered improper use.
The user is responsible for damage result-
ing from improper use.
Note
This is a flashlight. The LED light
included [halogen lamp, krypton lamp,
etc.] is only designed for this purpose.
It is not suitable for lighting rooms in a
domestic setting.
For Your Safety
Use only original plug-in charger for the charging
of lamps. The use of a plug-in charger OTHER
THAN the original could destroy the lamp.
Art.
Number of LEDs:
Lithium-ion batteries:
Voltage of mains
adapter:
Protection class
Charging time:
Light duration, main
light:
Light duration, extra
light:
LED lifetime:
Degree of protection:
Impact protection
rating:
Storage temperature:
Operating temperature: +10°C to +25°C
WARNING – Do not look directly
into the lamp if it is switched on. Do
not direct the laser beam on people
or animals. Risk of eye injuries!
Technical data
0827 940 115
1 x COB LED 5 W (main
light)
1 x SMD LED 3 W
(extra light / flashlight
function)
3.7 V, 2,600 mAh
100–240 V AC,
50/60 Hz
III
approx. 4 hours
Approx. 2 hours
(at 600 lumen)
Approx. 10 hours
up to 50,000 hours
IP 54
IK 07
-20°C to +45°C
5