Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
V
Volts
A
Amperes
Hz
Hertz
min
Minutes
Alternating Current
n o
No Load Speed
Class II Tool
.../min
Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Hot Surface
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 and a full face shield when operating this product.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
5 - English
DESIGNATION/EXPLANATION
Publicité
Table des Matières
