Publicité
Les langues disponibles
Les langues disponibles
• On your desktop, there is a Backup Drivers & Apps icon that allows
you to back up and restore your drivers and applications by fi rst
backing them up to a disc on an external drive. You are strongly
encouraged to make a backup of the drivers and applications in the
event of hard disk failure. If you ever need to reinstall any drivers
or applications, and you have not made a backup of the drivers and
applications you will need to download them from the Fujitsu Support
website: http://www.computers.us.fujitsu.com/support.
• More detailed information is also available in your User's Guide on
backing up your drivers and applications.
10. Access your User's Guide
• To take advantage of all the features of your new Fujitsu LifeBook
notebook, it is highly recommended that you read your electronic
User's Guide. It contains important detailed information about
your new computer. You can access your User's Guide by
connecting to the Internet and going to your support website
at http://support.fujitsupc.com/CS/Portal/support.do?srch=GUIDES
and download the appropriate User's Guide. Please note that you
will need your LIfeBook's serial and model number to access the
appropriate User's Guide.
Common Indicators
Status Display Panel
The Status Display Panel is located above the keyboard. Following are some common indicators.
Power Indicator
States whether your system is operational
Steady On: There is power to your
LifeBook notebook and that it is
ready for use.
Flashing: Your notebook is in sleep mode.
Steady Off: Your notebook is either in
Save-to-Disk mode, or it has been
turned off.
Battery Charge Indicator
Shows the charging status of the
battery(ies).
Orange, solid: System battery is charging.
Green, solid: System battery is fully
charged.
Orange, blinking: System is waiting to
charge battery (battery is out of thermal
range). Off: AC adapter is not plugged in.
Battery Level Indicators
Note: Indicators are for primary battery
(Battery 1) and optional second battery
(Battery 2.)
Green, solid: Battery is between 51%
and 100% charged.
Orange, solid: Battery is between 13%
and 50% charged.
Red, solid: Battery is 12% or
less charged.
Orange, blinking: Blinks during battery
status measurement (4 seconds after
battery is installed).
Red, blinking: There is a problem with
the battery.
Off: There is no battery installed.
4
Hard Drive/optical Drive Access
Indicator
This indicator glows green when your
internal hard drive is being accessed.
Note that fl ickering is normal.
NumLk Indicator
Shows that the integral keyboard is set
in ten-key numeric keypad mode.
CapsLock Indicator
Shows that your keyboard is set to type
in all capital letters.
ScrLk Indicator
Shows that your scroll lock is active.
IF THE BATTERY PACK IS INSTALLED WHILE THE
POWER IS TURNED OFF, THE BATTERY LEVEL
INDICATOR WILL DISPLAY THE CHARGE LEVEL
FOR FIVE SECONDS AFTER IT BLINKS ORANGE.
IF THE AC ADAPTER IS NOT CONNECTED OR THE
BATTERY PACK IS NOT FULLY CHARGED WHEN
THE COMPUTER IS SWITCHED TO STANDBY
MODE, THE INDICATOR WILL BLINK.
BATTERIES SUBJECTED TO SHOCKS, VIBRATION
OR EXTREME TEMPERATURES CAN BE
PERMANENTLY DAMAGED.
A SHORTED BATTERY IS DAMAGED AND MUST
BE REPLACED.
Quick Tips
It takes approximately 4 hours to
charge a fully discharged single
battery with unit off or in
suspend mode.
optimizing Battery Life
• Set power management setting
to Maximize Battery Life.
• Adjust display brightness levels
to lowest comfortable setting.
• Remove ExpressCards when
not needed.
• Utilize Suspend mode when
not using your notebook.
• Read the Power Management
section in your electronic User's
Guide for additional features.
Adjusting Display Brightness
• Fn + F6 to decrease brightness
• Fn + F7 to increase brightness
Adjusting Volume
• Fn + F8 to decrease volume
• Fn + F9 to increase volume
* Mono microphone jack or stereo
microphone/line in jack depending
on confi guration.
* * Stereo headphone/Optical Digital
Audio out jack or stereo head-
phone/Line Out/Optical Digital
Audio out jack.
Caution: Your system is
confi gured with Trusted
Platform Module (TPM)
Before you activate TPM, be sure
you fully understand how it works
by following the directions included
on the TPM applications CD. If you
choose to enable TPM, your TPM
password will be critical to the
operation of your computer and
MUST be remembered.
Drivers
Look for the latest drivers by
right-clicking the FDU icon and
selecting "update", or simply click
the FDU icon while connected to
the internet and the system will
automatically check for updated
drivers.
(For Latest Drivers)
(FDU)
Publicité
