Publicité
Les langues disponibles
Les langues disponibles
2
appliance description
1.
Water reservoir cover / filter holder
2.
Operating panel
3.
Gauge glass
4.
Drip stop
5.
Glass jug with cover
6.
Hot plate
7.
Water reservoir
8.
Removable filter holder
9.
Permanent coffee filter
3
before the first use
Before using the coffee machine for the first time, proceed as follows: Carefully unpack your coffee machine and remove all
packaging material and possible promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children.
After unpacking the machine, check it for external damage that may have occurred during transport.
Place the coffee machine on a flat surface. It is recommended to clean the inside of the new coffee machine prior to using it for the
first time. Do this by filling the water reservoir with cold water and allowing the water to flow through the machine without coffee.
Repeat this once or twice.
Clean the glass jug, filter holder and permanent coffee filter with hot soapy water, then rinse properly and wipe dry. Never use
abrasives!
Important: Only use cold water for cleaning the inside of the coffee machine. Hot water has a negative effect on the life span of the
machine.
4
making coffee
Check that the voltage stated on the information plate matches the voltage used in your region. Place the coffee machine on a flat,
stable surface. Insert the plug in an earthed wall socket.
1. Fold up the cover of the water reservoir and – using the glass jug – fill it with cold water to the required level (the lines indicate the
number of cups).
2. Place the permanent coffee filter or a paper coffee filter (size 1 x 4) of which the edges have been folded back in the filter holder.
This prevents the filter bag from folding inwards and closing.
3. Fill the coffee filter with the required amount of coffee (extra fine grind) and softly shake it until the coffee is distributed evenly.
For 10 cups, according to taste, you can use 5 to 6 measuring spoons of coffee, or 6 grams of coffee per cup. In case of a smaller
number of cups, you can change the amount of coffee accordingly.
4. Close the cover.
5. Place the glass jug on the hot plate.
6. Press the on/off key once. The red indicator light in the display will turn on. The machine is operational and the coffee will be made.
7. Once the filter process has been completed, remove the glass jug from the hot plate and pour out the coffee.
8. Coffee tastes best immediately after it has been made, so do not wait too long before serving. The glass jug can immediately be
placed back on the hot plate or you can pour the coffee into a thermos jug.
1
2
3
4
5
7
8
6
9
11
English
•
Publicité
