Publicité
Les langues disponibles
Les langues disponibles
STEP 2. Assemble the Door Pockets to either the
driver's side or cargo side of the Center Panel using
eight (8) 1/4-20 x 5/8" Carriage Bolts, 1/4-20 Nylon
Lock Nuts and 1/4" Flat Washers.
STEP 3. Attach Driver Side Panel to Center Panel
with both panels flush to the bottom using nine (9)
8-32 x 1/2" Machine Screws and 8-32 Nylon Lock
Nuts. The Bulkhead panels should be assembled
inside the van.
NOTE: Not all mounting holes will be
used on either of the vertical sides
of the Center Panel. Extra mounting
holes are for the swing door option
available for this Bulkhead.
INSTALLATION INSTRUCTIONS
CARGO SIDE
3
FLUSH/EVEN
CARGO SIDE
FLUSH/EVEN
DRIVER'S SIDE
DRIVER'S SIDE
Publicité
