Using The Remote Control; How To Use The Remote Control - Samsung HW-M4501 Manuel D'utilisation

08 uSInG tHe reMote controL

How to use the remote control



 Bluetooth
Surround
POWER
SOUND
MODE

VOL WOOFER
SOUNDBAR
Bluetooth
Surround
POWER
You can select the desired sound effect by choosing StanDarD, MuSIc, cLear VoIce,

SOUND
SPortS, or MoVIe.
MODE
• Drc (Dynamic range control)
SounD MoDe
Press to select a source connected to the Soundbar.

• bt PaIrInG mode
VOL WOOFER
Source



Sound control






Surround
Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the
SounD MoDe button while in standby mode, DRC (Dynamic Range Control) turns on
or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.)
To turn on "bt PaIrInG" mode in "bt" mode, press and hold the
for more than 5 seconds. See page 14 for details.
ENG - 15
Turns the Soundbar on and off.
Power
You can select from trebLe, baSS, or auDIo
Sync.
• To control the volume of the treble or bass
sound, select trebLe or baSS in Sound
Settings, and then adjust the volume
between -6~+6 by using the up/Down
buttons.
• If the video and audio between the TV and
your Soundbar are not synchronised, select
auDIo Sync in Sound Settings, and then
set audio delay between 0~300 milliseconds
by using the up/Down buttons.
(Except "uSb" mode)
• Audio Sync is only supported in some
Bluetooth
Surround
POWER
Bluetooth
functions.
Surround
POWER
The Surround Sound function adds depth and a
Bluetooth
Surround
sense of space to sound.
SOUND
POWER
MODE
SOUND
Each time you press this button, ON and OFF
MODE
alternate.
SOUND
• ON : Play sound over all the speakers.
MODE
• OFF : You can hear the sound of the original
source channel from several speakers.
VOL WOOFER
VOL WOOFER
VOL WOOFER
(Source) button