Operation And Use - Beem Multi-back Topclass 5 in 1 Mode D'emploi

Multi-back Topclass 5 in 1
removing the kneading/stirring hook
(images A2 and A3)
Hold the wing nut on the underside of
‹
the baking mould firmly with one hand
and the kneading/stirring hook firmly
with the other.
Pull the kneading/stirring hook off
‹
the drive spindle with a slight turn-
ing movement while simultaneously
turning the wing nut in the opposite
direction.
NOTE
► You can remove the kneading/
stirring hook after the final knead-
ing process in the selected baking
programme so that there is no hole
in the bread after baking.
Sprinkle a little flour onto your hands
and lift the dough in order to pull the
kneading/stirring hook upwards out
of the baking mould.
Inserting the baking mould (images
B1 - B3)
First push the kneading/stirring hook
‹
onto the drive spindle of the baking
mould.
Turn the baking mould slightly and
‹
insert it into the appliance.
Turn the baking mould clockwise until
‹
it snaps in.
removing the baking mould (images
C1 - C3)
Open the cover of the appliance.
‹
Use the handle to turn the baking
‹
mould anticlockwise until it stops.
Lift the baking mould out of the appli-
‹
ance.
28
All manuals and user guides at all-guides.com
‹
‹
‹
‹
‹

Operation and use

Basic operation of the appliance
NOTE
► Baking tips can be found in the
recipe book supplied.
Remove the baking mould from the
appliance and if necessary, push
the kneading/stirring hook onto the
drive spindle in the base of the bak-
ing mould (see section Inserting and
removing baking mould and knead-
ing/stirring hook).
Pour the previously measured bak-
ing ingredients into the baking mould.
Use the baking instructions in the
recipe book or on the packaging of
the selected bread baking mixture as
a guide.
NOTE
► You can use the measuring cup
and measuring spoon supplied for
measuring the baking ingredients.
For liquids, place the measuring cup
on a flat surface and check the filling
level at eye level.
Insert the baking mould into the ap-
pliance (see section Inserting and
removing the baking mould and
kneading/stirring hook).
close the lid.
Insert the plug into a mains socket.
Use the button to select a suit-
‹
able baking programme.
BEEM - Elements of Lifestyle
EN