Milwaukee 8975 Manuel De L'utilisateur page 8

ACCESSORIES
For a complete listing of accessories refer to your MILWAUKEE Electric
Tool catalog or go on-line to www.mil-electric-tool.com. To obtain a cata-
log, contact your local distributor or a service center listed on the back
cover of this operator's manual.
Hook Nozzle Cat. No. 49-80-0292
The hook nozzle is used for surround bending, soldering
pipe and applying heat to shrinkable tubing.
Deflector Nozzle
The deflector nozzle directs the airflow at a 90 degree
angle from the heat gun nozzle. This helps to minimize
thermal shock caused by rapid expansion of glass when
softening putty or removing paint from windows.
Air Spreader Nozzle
The air spreader nozzle reduces the airflow from a
circular area to a wide narrow line. This nozzle is used
for removing paint and softening and forming thermo-
plastic sheets, vinyl floor tiles, linoleum and formica.
Reduction Nozzle
Reduction nozzles intensify the application of heat in a
specific area. This nozzle is used for bending plexiglass,
soldering and directing heat into corners.
Reduction Nozzle
Reduction nozzles intensify the application of heat in a
specific area. This nozzle is used in similar applications
as reduction nozzle.
Reduction Nozzle
Reduction nozzles intensify the application of heat in a
specific area. This nozzle may be used for soldering.
Soldering Reflector Nozzle Cat. No. 49-80-0307
The soldering reflector nozzle is ideal for soldering
copper pipe joints and applying heat to shrinkable tubing.
Slit Nozzle Cat. No. 49-80-0308
The slit nozzle reduces the airflow from a circular area
to a narrow line. This nozzle is used for lap welding PVC
canvas or sheeting.
NOTE: Must be used with reduction nozzle Cat. No.
49-80-0305.
Cutting Nozzle Cat. No. 49-80-0309
The cutting nozzle is used for cutting stryofoam up to 4"
thick. Straight or curved cuts can be made.
NOTE: Must be used with reduction nozzle Cat. No.
49-80-0305.
page 8
Cat. No. 49-80-0293
Cat. No. 49-80-0294
Cat. No. 49-80-0305
Cat. No. 49-80-0306
Cat. No. 49-80-0297
MAINTENANCE
To reduce the risk of injury, always unplug your tool before
performing any maintenance. Never disassemble the tool
or try to do any rewiring on the tool's electrical system.
Contact a MILWAUKEE service facility for ALL repairs.
Maintaining Tools
Keep your tool in good repair by adopting a regular maintenance pro-
gram. Before use, examine the general condition of your tool. Inspect
guards, switches, tool cord set and extension cord for damage. Check for
loose screws, misalignment, binding of moving parts, improper mount-
ing, broken parts and any other condition that may affect its safe opera-
tion. If abnormal noise or vibration occurs, turn the tool off immediately
and have the problem corrected before further use. Do not use a dam-
aged tool. Tag damaged tools "DO NOT USE" until repaired
(see "Repairs").
To reduce the risk of injury, electric shock and
damage to the tool, never immerse your tool in liquid
or allow a liquid to flow inside the tool.
Cleaning Tools
Clean dust and debris from vents. Keep the tool handles clean, dry and
free of oil or grease. Use only mild soap and a damp cloth to clean your
tool since certain cleaning agents and solvents are harmful to plastics
and other insulated parts. Some of these include: gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Never use flammable or com-
bustible solvents around tools.
Repairs
If your tool is damaged, return the entire tool to the nearest service center
listed on the back cover of this operator's manual.
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE tool is tested before leaving the factory and is war-
ranted to be free from defects in material and workmanship. MILWAUKEE
will repair or replace (at MILWAUKEE 's discretion), without charge, any
tool (including battery chargers) which examination proves to be defec-
tive in material or workmanship from five (5) years after the date of
purchase. Return the tool and a copy of the purchase receipt or other
proof of purchase to a MILWAUKEE Factory Service/Sales Support
Branch location or MILWAUKEE Authorized Service Station, freight pre-
paid and insured. This warranty does not cover damage from repairs
made or attempted by other than MILWAUKEE authorized personnel,
abuse, normal wear and tear, lack of maintenance, or accidents.
Battery Packs, Flashlights, and Radios are warranted for one (1) year
from the date of purchase.
THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING
LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN-
TIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR
MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.
This warranty gives you specific legal rights. You may also have other
rights that vary from state to state and province to province. In those
states that do not allow the exclusion of implied warranties or limitation
of incidental or consequential damages, the above limitations or exclu-
sions may not apply to you. This warranty applies to the United States,
Canada, and Mexico only.
WARNING!
WARNING!