SMC EZ Connect -EZ6505TX Manuel D'installation page 6

SMC-EZ6505TX_UK/GE/FR/SP/IT.qxd
4. If there is a problem with the installation of the driver, an
exclamation point appears next to "SMC1233A-TX PC 10/100
Network card". Double-click on "SMC1233A-TX PCI 10/100 Network
card". The "Properties" window opens and a message regarding the
status of the device displays in the window. You will likely need to
verify the network device or computer settings. If problem
persists, uninstall and reinstall drivers.
9
23/9/02 12:48 pm Page 11
Step C
How to Set-up a Peer-To-Peer Network in Win 95/98
This section describes how to connect 2 (or more) PCs together in
a network workgroup with the equipment provided in the SMC EZ
connect network Kit. Each PC in the network should already have
an SMC network card installed and be running in Win 95/98. The
network cards should be linked to the SMC EZ switch by the
network cables provided in this kit.
1. Click "Start", "Settings", "Control Panel" and double
click "Network".
2. Within the "Configuration" tab, change the setting of the
"Primary Network Logon" to "Client for Microsoft Networks".
Click "File and Print Sharing" and select "I want to be able to
give others access to my files".
Click "OK".
3. Now click on "Add" and choose "Protocol" from the "Select
Network Component Type" window and then click "Add". Choose
"Microsoft" and select "NET BEUI" from Network Protocols.
Click "OK".
This needs to be done on both PC's
4.Click "Identification" tab and choose computer name to identify
your computer on the network (e.g.PC1). Also choose a
workgroup name (e.g. Home network). Click "OK".
10