Connection - Lincar 149A Serie Instructions D'utilisation Et D'entretien

1.4 Connection

Before connection check technical data reported in the technical plate ( Chap. 4 ) and
•
control that it correspond to the ones required in the order.
All heating biomass equipment especially wood appliance has to evacuate the
•
combustion products in a flue built in conformity with normative in force.
The following instructions describes „ informations for a good installation „ and it refers
•
to a normative in force but it are not to be consider exhaustive for installations laws.
COLLAR EXHAUST FUMES ASSEMBLY
The equipment is provided by collar exhaust fumes for a vertical connection , anyway it's
possible also the back connection.
Vertical exhaust fumes collar
Place the collar over the plate (Fig.1) and fix it to
•
the plate employing the enclosed screws. Be
careful to employ the screws in the right way.
HANDRAIL ASSEMBLING
For every Mod. Gaia... Fig.2
To insert the caps "D" on terminals
support "C".
To insert the support "C" in tube "A"
than fix it to the plate frame with
screws "F" interposing the connection
ring "B".
HANDRAILS ASSEMBLING
For models Aurora..., Valentina..., Fig.3
Unscrew the screws
•
which are
screwed on plate
frame, place
handrail on touch
with the frame plate
that screw it with
the screws.
just
the
25/80
IT IT IT IT- - - - EN EN- - - - FR FR- - - - ES ES mod. 149A EN13240
EN EN FR FR ES ES
Exhaust fumes collar
Fig. 1
Fig. 2
Fig. 3