Electrical Chamber; Start-Up - Delta ELEKTRA UV EA Serie Instructions De Montage

E. ELECTRICAL CHAMBER
4-pin connector
of the UV lamp
Ballast
F. START-UP
1 Start the circulation pump.
Drain all air from your system through the air relief valve on the filter (if so equipped).
2
Make one check for leaks in your piping, accessories, and under the electrical enclosure
3
bonnet.
Check the chemical balance of your swimming pool (particularly pH, TAC* et
TH*) and adjust them in function.
4
Reminder: Your Elektra UV does not eliminate the
need for proper pool chemical balance.
* TAC = Alcalimetric Titration (alkalinity of water)
* TH = Water Hardness
V4 Elektra EA Anglais.doc
Marque, Modèles et Brevets déposés - Produits exclusifs
UV Lamp
Copyright DELTA UV
Page 8