Installation; Vtx-E Radio Receiver With Vtx-Sp Room Thermostat; Vtx-Eu Radio Receiver With Vtx-Sp Room Thermostat - Vitramo VH Mode D'emploi

4

Installation

During the planning and configuration of the Vitramo
heating system, you created an installation list and also drew
4.1

VTX-E radio receiver with VTX-SP room thermostat

The VTX-E radio receiver is mounted as a surface-mounted
device in the vicinity of the heating element or in the sub-
distribution unit. The switching capacity is 16 A or 3.6 kW.
Figure 3: VTX-E
4.2

VTX-EU radio receiver with VTX-SP room thermostat

The VTX-EU radio receiver is inserted as a flush-mounted
device in the switch box close to the heating element. The
switching capacity is 10 A or 2.3 kW.
Figure 5: VTX-EU
1712205
the placement of the heating elements in a works plan, if
necessary.
The VTX-SP room thermostat measures the room
temperature and operates the radio receiver depending on
the freely programmable weekly program.
Figure 4: Circuit diagram VTX-E with heating element and
The VTX-SP room thermostat measures the room
temperature and operates the radio receiver depending on
the freely programmable weekly program.
Figure 6: Circuit diagram VTX-EU with heating element and
www.vitramo.com
VTX-SP
VTX-SP
23