Publicité
Les langues disponibles
Les langues disponibles
CT230-GA / CT230-GB
If not already done, affix the provided terminal sticker to the
wallplate.
Insert the wires (not included) through one of the two
openings on the wallplate and connect the CT230 linked units
together in a daisy-chain configuration (see connection
diagram on page 7).
Reinstall the faceplate on the wall plate and tighten the screw.
Access the ON/OFF switch by sliding the CT230 door upwards
and place the CT230 linked unit on OFF.
Door
Switch
5
Sticker
Publicité
