Maintenance; Wiring Diagram - Mi-T-M Corporation Elite Serie Manuel De L'opérateur

WARNING: NEVER SERVICE HEATER WHILE IT IS PLUGGED IN OR WHILE HOT!
Use only original equipment replacement parts. The use of alternate or third party components can cause
unsafe operating conditions, and will void your warranty.
1. Every heater should be inspected before each use, and at least annually by a qualified service person.
2. The hose assembly shall be visually inspected prior to each use of the heater. If it is evident there is excessive
abrasion or wear, or the hose is cut, it must be replaced prior to the heater being put into operation. The
replacement hose assembly shall be that specified by the manufacturer.
3. The appliance must be kept clear and free from combustible materials, gasoline and other flammable vapors
and liquids.
4. The flow of combustion and ventilation air must not be obstructed. Be sure to check the fan assembly and
ensure the motor and blade are operating properly.
5. Compressed air may be used to keep components free of dust and dirt build up.
Note: Do not use the compressed air inside any piping or regulator components.
WARNING: USING HEATER WITHOUT PROPER MAINTENANCE CAN LEAD TO IMPROPER
COMBUSTION AND SOOT PRODUCTION.
Propane and Natural Gas Portable Heaters Manual

MAINTENANCE

WIRING DIAGRAM

13