Input Menu's
Menu 82 – Serial Input Ports RM-6(SR-4)
0= F(A)
1= E, F(A,B)
Menu 83 – Input Lock Tally from
0= System
Normally Set to System, Set to master if using with Avid or Pro-tools auto-edit.
Menu 84 – Convert Remote Fast forward and Rewind to Shuttle
0= No
Use if Remote Fwd/Rwd commands cause video to lose picture.
Menu 85 – P2 Remote Control of
0= Master
When controlling the system from a Serial Sony P2 controller via the input port, are
commands routed to the Master or the currently selected machine. When All machines is
selected the command will be sent to all machines.
Menu 86 – External Machine ID
0= Previous Menu
When controlling the system from a Serial Sony P2 controller via the input port, this parameter
determines which device ID is reported by the system:
0= Previous menu
1= Record
2= CB
3=A 4=B 5=C 6=D 7=E
2017 CB Electronics
Clavier de contrôle TFT
Menu 82 – Serial Input Ports RM-6(SR-4)
2= D, E, F(A,B,C)
Menu 83 – Input Lock Tally from
Menu 84 – Convert Remote Fwd/Rwd to Shuttle
Menu 85 – P2 Remote Control of
1= Selected Machine
Menu 86 – External Machine ID
1= Record
The ID reported follows either the Master machine or selected
machine dependant on Menu 85.
The ID reported follows the current selected Record machine.
The ID reported is a unique CB ID.
The reported ID is the same as the machine on the selected port.
3= C, D, E, F
1= Video
2= CB
3= A
4= B
4= B, C, D, E, F
1= Master
2= All
2= All Machines
5= C
6= D
Page : 34
7= E