Unit Menu's; Menu 02 - Select Unit Menu; Unit Record Menu's; Menu 03 - Initial Record Command - CB ELECTRONICS TFT Serie Manuel

Unit Menu's

Menu 02 – Select Unit Menu
0=Record
After selecting 0= Unit from the ROOT hyperlinks to access different sections:
Record functions.
0=Rec
Chase/Synchroniser functions.
1=Chase
Timecode Reader/Generator functions.
2=Code
3=Generic Other functions.

Unit Record Menu's

Menu 03 – Initial Record Command
0=Record
From play, use either the RECORD key only or both RECORD and PLAY to enter record.
Menu 04 – Check Lock Status
0= Yes
Check for system lock before record.
0= Yes
No check for system lock before record.
1= No
Menu 05 – Master or Rec Enabled Offset Change
Menu 05 – Master or Record Enabled Offset Change
0= Disabled
0= Disabled Offset change on record enabled machines is disabled.
1= Enabled Offset change on record enabled machines is enabled.
Menu 06 – Virtual Record Tally
Record tally is on only if one or more machines are in Record.
0= Off
Record tally is ON if a record command has been sent or one or more
1= On
machines are in Record.
2017 CB Electronics
Clavier de contrôle TFT

Menu 02 - Select Unit menu

1=Chase

Menu 03 - Initial Record Command

Menu 04 – Check Lock Status
Menu 06 – Virtual Record Tally
0= Off
2=Code
1=Record + Play
3=Generic
2=None
1= No
1= Enabled
1= On
Page : 15