Subaru E231SSJ000 Instructions D'installation page 3

7
A
Loosely secure Hood Protector (A) to clips (K) with small screws (G)
and washers (H).
9
I
I
Install tape (I) provided onto hood. Apply tape parallel with the edge
of the hood.
11
E
Install nut inserts (C) into clips (E). Install clips (E) on hood over
tape.
PART NUMBER ISSUE
001
E231SSJ000
G
H
K
E
DATE
10/17/2018
8
A
Mark locations of remaining holes and bumpons using a non-
permanent marker. Remove small screws (G), washers (H), and
Hood Protector (A).
10
D
Install tape (D) provided on hood. Apply tape so approximately one
half of the strip is adhered to the top side and half is adhered to the
underside of hood.
12
C
L
A
Front of Hood
Install plastic nut inserts (C) into clips (L). Secure clips (L) to Hood
Protector with small screws (G) and washers (H) provided. Ensure
tape liner pull tab on clips (L) is folded over and facing front of hood.
Torque 0.2N.
SUBARU OF AMERICA
D
G
T
H
SUP503
0.2N
PAGE
3/8