How To Use - Samsung SOD14C4LN Manuel D'installation

6. How to Use

! QUAD SCREEN mode
C1 to C4 button can make picture freeze or melt.
G
In this case, FREEZE appears on that screen will be blinking.
Camera connections are automatically detected and displayed in quad through the
G
channels.
If all cameras are disconnected, quad mode can not change sequential swithching mode.
G
Page A and Page B are switched in set time.
G
If change Page A and B by the key "PAGE A/B", and mode is changed to quad manual
G
mode.
Pushing "MODE" key again, quad sequential mode is set.
G
Listening is choose the camera channels C1~C4.
G
Channel 1 : TALK key + C1 key
Channel 3 : TALK key + C3 key
@ AUTO SEQUENTIAL SWITCHING MODE
To set up sequential mode, push MODE key once at quad sequential mode.
G
The picture are switched in full display through C1~C4 at sequential mode.
G
Listening is active on C1~C4 only while pushing the button and the picture display is
G
on the channel only.
This system detects the cameras connected or discoonnected.
G
Camera connections are also detected at sequential mode, and switching is on to only
G
the cameras connected.
If the camera is disconnected through the channels, beep sound in on and skipped that
G
channel display.
When in the sequential switching mode, set the Freeze mode by pressing the MENU
G
key.
If all camera are disconnected, the monitor automatically, switches to the quad mode.
G
29
E