Basic System Installation - Samsung SOD14C4LN Manuel D'installation

1-4. Basic System Installation

Perform the following steps to install your system.
Take the monitor out of the packaging box.
G
Place the monitor where you would like to install it. Do not turn on power until
G
installation is complete
Choose the place where you want to install the camera.
G
Once the monitor and camera locations have been chosen, install the camera.
G
Connect the cable to the jack on the back of the camera.
G
Connect the other end to CAMERA IN on the back of the monitor.
G
(At this time, select the numbers and sequence of cameras.)
Connect the camera you wish to install (as shown below).
G
Connect the power cord between the monitor and the power outlet.
G
When the Power switch on the front panel of the monitor is pressed, the equipment
G
becomes operational.
(Initially quad screen will be displayed.)
✳ After the power has been turned on, the CRT needs approximately 20 seconds of
stabilization period.
15
E