Connecting Peripheral Devices; To Connect A Pir Sensor - Samsung SOD14C4LN Manuel D'installation

2. Connecting Peripheral Devices

2-1. To Connect a PIR Sensor

PIR sensor
- An additional PIR sensor or external sensor can also be connected.
- The additional PIR sensor can be connected as shown in the above graphic.
- Sensor's trigger signal is NO (Normal Open).
- Sensor is not supplied. (Sold separately)
2-2. Connecting to a VCR
- Connect the VCR as shown below.
- Connect Time lapse VCR's Alarm in jack to Monitor Alarm out jack.
- Connect Time lapse VCR's Ground to Monitor's Alarm Ground jack.
Camera alarm in jack
Sensor
input
16
Sensor