Health & Safety; Connecting To The Power Supply; Pre-Start Checks - Belle Group Minitile 180 Manuel De L'opérateur

PPE (Personal Protective Equipment).
Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe capped
footwear.
Wear clothing suitable for the work you are doing. Tie back long hair and remove any jewellery which may catch in the equipment's
moving parts.
Dust.
The sawing process will occasionally produce dust, which may be hazardous to your health. Always wear a mask that is suited to the
type of dust being produced.
The machine is to be connected to the mains by a residual current circuit breaker (RCCB) or class II isolation transformer with the
following characteristics:
MINITILE 180
RCCB
TRANSFORMER
MINITILE 200
RCCB
TRANSFORMER
MINITILE 230
RCCB
TRANSFORMER
MAGIKTILE 180
RCCB
TRANSFORMER
MAXITILE 260
RCCB
TRANSFORMER
THE MINITILE / MAGIKTILE MACHINE IS DESIGNED FOR WORKING WITH
WATER.
Before and during cutting operations, make sure that the water level is suffi cient to
cover the diamond part of the blade. Fill or top up the basin directly, as shown in the
picture 1a.
In particular cases, it may be necessary to use a tray to recover the cooling water.
If so, use a tray with the following dimensions:
MINITILE 180 = L 19.7 in, P 23.6 in, H 4.0 in
MINITILE 200 = L 19.7 in, P 23.6 in, H 4.0 in
MINITILE 230 = L 23.6 in, P 23.6 in, H 4.0 in
MAGIKTILE 180 = L 19.7 in, P 23.6 in, H 4.0 in
THE MAXITILE MACHINE IS DESIGNED FOR WORKING WITH WATER.
Before any cutting operation, make sure that the water level inside the basin is the
same as the one shown in picture 1b.
Through an on-off valve it is possible to adjust the water fl ow according to the type of
material to be cut. An innovative cooling system makes it possible and allows the disk
to be always wet.
Health and Safety

Connecting To The Power Supply

230V In 3 A Id 20 mA
230V 50 Hz 650 W
230V 5 A Id 20 mA
230V 50 Hz 650 W
230V 10 A Id 20 mA
230V 50 Hz 1500 W
230V In 6 A Id 20 mA
230V 50 Hz 650 W
230V In 5 A Id 20 mA
230V 50 Hz 1000 W

Pre-Start Checks

115V In 6 A Id 20 mA
115V 50 Hz 650 W
115V 6 A Id 20 mA
115V 50 Hz 650 W
115V 16 A Id 20 mA
115V 50 Hz 1500 W
115V In 3 A Id 20 mA
115V 50 Hz 650 W
115V In 10 A Id 20 mA
115V 50 Hz 1000 W
15
1a
1b