Garland Roll&Comb 141 W-V19 Manuel D'instructions page 21

handling it so as not to accidentally short-circuit it with
conductive elements such as rings, bracelets, keys,
etc. When the battery is short-circuited it increases in
temperature and may explode or burn.
Do not try to burn the battery or incinerate it
if it is damaged or totally discharged. Do not leave
the battery near a heat source. The battery can
explode with heat or fire, causing serious personal and
material damage.
This battery is sealed and should never leave liquid
inside. If the seal breaks down and the liquid touches
your skin quickly wash with plenty of soap and water,
neutralize the liquid with a weak acid such as lemon
or vinegar and go to your medical center urgently. If
battery fluid touches your eyes, rinse thoroughly with
water for 10 minutes and seek immediate medical
attention. If the seal breaks down, do not inhale the
vapors produced by the battery, as they may cause
irritation. In case of accidental inhalation, breathe
fresh air and seek urgent medical attention.
Always disconnect the battery from the machine
before doing any work. Only handle this machine
when it is disconnected.
2.5. USAGE AND CARE OF THE MACHINE
Use this machine only to rake artificial grass. Do
not use this tiller for any other purposes. The use of
this machine for other non contemplated uses can
cause dangerous situations.
Use this machine and its related accessories
according to the instruction manual and taking into
account specific working conditions. The use of this
machine for jobs not contemplated here can be
dangerous.
Check that all security measures are in place and
work properly.
The manufacturer will not be responsible for damages
caused due to an incorrect use of the machine.
Do not overstretch the machine. Use the machine for
its recommended use. The use of the machine for its
correct job will guarantee a better job as well as a
safe use.
Do not use the machine if the switch does not change
from closed to open. Any electric machine that cannot
be controlled by the switch is dangerous and must be
repaired.
Before starting to work with the machine, check that
the blades are not in contact with any object and that
they can move freely.
Service the machine adequately. Check that the
moving parts are well aligned and not tangled, that
there are no broken parts or other conditions that
could affect the usage of the machine. Repair if
necessary prior to use. A lot of accidents are caused
due to poor maintenance of the machine.
Do not use the machine in working areas that are
steep as you cannot guarantee your personal security.
When working in conditions with a little incline, work
more slowly and always ensure that you maintain a
good stability.
If the machine starts to vibrate in a strange manner,
disconnect the machine and examine the machine
to find the cause. If you cannot detect the cause,
take the machine to your nearest after sales service.
Vibrations are always a clue as to a problem with the
machine.
Maintain the handles of this machine clean and dry.
21/80
English