1. SAFETY REGULATIONS
Prudence is essential when it comes to on the job safety and
to prevent industrial accidents.
The following cautions are offered here for this precise
purpose. Failure to follow the regulations given below exonerates our firm
from all civil and penal responsibility.
1. Switch off the engine when changing work attachments.
2. Switch off the engine when transporting the machine.
3. If you are working of a steep gradient, a second operator must prevent the
tractor from sliding or tipping over. He can do this with the help of a tensioned
cable upstream from the tractor and at a safe distance.
4. Every transfer or manuever should be made with the attachment control
disengaged.
5. The operator must keep a safe distance from the attachment.
6. Attachment guards should be positioned to prevent stones, grass or other
material from striking the operator or objects near the attachment.
7. When starting the engine, the operator should stand to the side of the tractor.
8. Never service, repair or carry out any kind of work on the tractor or attached
implements unless the engine has been turned off, the key removed from the
starter and the attachment lowered to the ground.
Pay extra attention to the cutting blade. Before any work, it must have come to a
complete stop.
9. The operator must make certain there are no persons, animals or things in
the machine's working range.
10. Safety plates and stickers are essential means of information on correct use
of the machine. Replace them when they are illegible or badly worn.
11. The operator must check to be certain that every part of the tractor and,
especially the safety devices, are in good working condition and work to
specs. They should be kept in perfect working condition. If you note any
malfunctioning, fix or repair them in good time. If necessary contact your
nearest
Failure to observe these instructions releases manufacturer from all liability.
Pay special attention to the strickers on the brush clearing attachment.
fig.4: Refer to this Operating and Maintenance Manual.
fig.5: Danger! Immediate danger of serious injury from cutting instruments of
flying stones.
Assistance
20
Centre.