Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
2D BLUETOOTH BARCODE SCANNER FOR IOS
RF-IDC9277L
Item no. 1583218
Intended Use
This product is designed to scan barcodes. You can connect it to your mobile device for
quick and reliable scanning of conventional 1 D (e.g. EAN) or 2D barcodes (e.g. QR codes or
PDF417). You can store the barcodes on your mobile device, which connects to the barcode
scanner via Bluetooth. You can then use the scanner and mobile device to scan, enter and
record barcodes. The barcode scanner features a built-in holder that you can use to attach your
mobile device. It is ideal for on-the-go use in shops, warehouses or offices. Power is provided
by a built-in rechargeable battery, which can be charged using a standard USB charger. You
can use the USB cable on the barcode scanner to charge a connected mobile device when the
built-in battery is charging.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture
(e.g. in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit or fire. Read the instructions carefully
and store them in a safe place. Only make this product available to third parties together with
its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Barcode scanner with strap
• Quick start guide
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
sExplanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the
product.
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in adverse ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
• Operating instructions
b) Rechargeable batteries
• The rechargeable battery is built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of a rechargeable
battery may cause it to explode or catch fire!
• Never short-circuit the contacts on the rechargeable battery. Do not throw the
battery or the product into open flames. This may cause a fire or explosion!
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the battery before recharging it.
• Never leave the battery unattended when it is charging.
• Place the product on a heat-resistant surface before charging the battery. The
product may become warm when the battery is charging.
Product overview
6
7
5
4
8
3
9
10
11
2
1
a) Charging the barcode scanner
Charge the battery before using the product for the first time.
The LED indicator (11) flashes orange when there is insufficient battery power remaining.
Charge the battery straight away when this occurs. To charge the battery, follow the steps
below:
• Move the sliding switch (9) to the "C" position.
• Pull the cap out of the micro USB port (3).
• Connect the micro USB connector on the USB cable to the micro USB port (3) on the product.
• Connect the USB-A connector on the micro USB cable to a USB port on a computer or
another suitable USB power source, such as a USB power adapter for a mobile device.
• If you wish to charge your mobile device, connect the micro USB connector (1) to the
charging port on your mobile device. The batteries in both devices will charge simultaneously.
• Charging will start automatically when the USB power source delivers a current. The LED
indicator (11) will flash red and orange to indicate that the battery is charging. Depending on
the remaining battery level, a full charge takes 4-5 hours. The LED indicator will switch to a
steady orange when the battery is fully charged. The device is now fully charged and ready
for use.
If you previously pressed the power saving button (8) (i.e. the device is in power
saving mode) or the device is switched off, the LED indicator will not turn on when
the battery is charging. The charging indicator on your mobile device will indicate
that the battery is charging.
• Move the sliding switch (9) to position "O" when the indicator indicates that the battery is
fully charged. The LED indicator will flash briefly and you will hear a beep indicating that the
device is ready for use.
If the battery becomes fully discharged, the system time will be reset to the factory
default. If this occurs, you will need to reset the time after recharging the battery. See
"Setting the date and time" for details.
• Remove the product from the USB power source when the battery is fully charged.
• Insert the cap back into the micro USB port and ensure that the port is sealed properly.
The barcode scanner does not automatically enter power saving mode when the
battery is charging.
b) Attaching a mobile device to the barcode scanner
You can attach your mobile device to the holder on the barcode scanner. Your mobile device
communicates with the barcode scanner wirelessly via Bluetooth.
• Peel the transparent film off the adhesive pad (10). If necessary, remove any protective
covers or other accessories from your mobile device. Place the back of your phone onto the
scanner using the hooks on the edge of the holder.
• Press the suction pads (7) and the adhesive pad (10) firmly to secure both parts together.
• Remove the scanner from your mobile device when it is not required. The adhesive pad is
reusable.
• If desired, remove the strap from the holder on the barcode scanner.
c) Switching on/off and enabling power saving mode
• Hold down the scan trigger (5) for one second to switch the barcode scanner on.
1 Micro USB connector
2 Strap connector
3 Micro USB port (for charging)
4 Multifunction button
5 Scan trigger (finger touchpad)
6 Scan window
7 Suction pads (3x)
8 Power saving button
9 Sliding switch ("O" and "C")
10 Adhesive pad
11 LED indicator
Publicité
