amzchef YL-IF7018S-5B5B3B1B Manuel D'instructions page 29

The induction hob or a
cooking zone has turned
itself off
unexpectedly, a
sounds and an error code
is displayed (typically
alternating with one or two
digits in the
cooking timer display).
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state automatically
and display corresponding protective codes:
Problem Possible causes
F3/F4 Temperature sensor of the induction
coil failure
F9/FA
Temperature sensor of the IGBT
failure.
E1/E2 Abnormal supply voltage
E3 High temperature of the induction coil
temperature sensor
E5 High temperature of the IGBT
temperature sensor
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.
Technical fault.
tone
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
Please contact the supplier.
Please restart after the hob cools
down.
29