amzchef YL-IF7018S-5B5B3B1B Manuel D'instructions page 23

Table de cuisson à induction
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touching the heating zone selection control that you want to set
the timer for. (e.g. zone 1#)
2.Touch timer control, the minder indicator will start flashing and "30" will
show in the timer display.
3.Set the time by touching the "-" or "+" control.
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase
by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4.When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash for 5
seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
5.To cancel the timer, touch the heating zone selection control, and then touch the "-" of
timer and scrolling down to "0", the timer is cancelled, and the "00" will show in the minute
display, and then "--".
6.When cooking timer expires, the corresponding cooking zone will be
automatically switch off and show "H".
Other cooking zone will keep operating if they are turned on previously.
23

Publicité

Table des Matières
loading

Table des Matières