Contents Of Carton; Installation; Installation Considerations - Rockford Fosgate RFX Serie Installation Et Fonctionnement

P
RECAUTIONS
Handling the Detachable Faceplate
DO NOT drop or cause shock to the faceplate as serious damage may occur. Protect the faceplate
by storing it in the supplied carrying case.
Avoid Mechanical Malfunction
DO NOT grab a disc while it is being automatically loaded into the source unit. Doing this may cause
serious damage to the playback mechanism and/or damage to the disc.
COMPACT DISCS
Disc Handling and Care
DO NOT touch the playing side (opposite of label side) of the disc. When handling the disc, only the
outer edges or center hole of the disc should be touched. DO NOT affix any sticker or label to the
disc. DO NOT apply vinyl record spray, anti-static agent, acetone, or any other volatile chemicals to
the disc.
Damaged Disc
DO NOT play a cracked, warped, or damaged disc. Doing this may cause serious damage to the
playback mechanism.
New Discs
The CD player will eject discs that have either been inserted incorrectly or have irregular surfaces. If a
new disc is ejected after loading, feel around the outer edge of the CD and its center hole. Any small
burrs or irregularities could inhibit proper loading of the disc.To remove the burrs, rub the inside
edge of the hole and outside edge of the disc with an object such as a ball point pen.
C C
ONTENTS OF ARTON
Model 9020M Source unit
Installation & Operation Manual
Standard Mounting Sleeve
Back strap (taped to box insert)
I
NSTALLATION

INSTALLATION CONSIDERATIONS

The following is a list of tools needed for installation:
Volt/Ohm Meter
Wire strippers
Wire crimpers
Wire cutters
#2 Phillips screwdriver
Battery post wrench
4
Chassis Release Keys (2)
Hardware Package
16-pin Power Harness
Faceplate Case (1 Soft and 1 Hard)
Hand held drill w/assorted bits
1/8" diameter heatshrink tubing
Assorted connectors
Soldering iron
Solder
Heat gun