Publicité
Les langues disponibles
Les langues disponibles
DM 2610011275 05-10:DM 2610011275 05-10 5/6/10 10:38 AM Page 14
B TTERY
HOLDER
5. Insert the battery pack into the tool by aligning the
guide ribs on the battery with the guide track on the
tool. The two parts will only fit together when the two
arrows align. The two parts will join together with a
click.
RISK OF FIRE USE ONLY 1.5V
W RNING
Do not install backwards, charge
W RNING
or put in fire. Batteries may
explode or leak.
Important Charging Notes
If you anticipate long periods of non-use for your tool
it's best to unplug your charger and battery pack from
its power source. Unplugging the charger will extend
the life expectancy of the charger and battery pack.
B TTERY
P CK
COVER
GUIDE TR CK
LK LINE B TTERIES ONLY.
Charging the tool (Model 7300 only)
The Model 7300 Cordless Rotary Tool battery pack is
not fully charged. The tool is equipped with a removable
battery pack. Be sure to charge pack prior to initial use.
For best re sults on first charge, charge pack overnight.
To charge the tool:
1. Put the switch in the "OFF" position.
2. Squeeze release tabs on both sides of battery pack,
and remove pack from back of tool as shown on page
13.
3. lign exterior shape of battery pack with exterior
shape of charger, squeeze release tabs, insert battery
pack into charger as shown and release pressure on
tabs so it locks in place.
4. Plug charger into the power source. The green L.E.D.
light indicates connection has been made and the
battery pack is charging. The LED light will remain lit
even after charging is complete. Under normal usage
the tool normally requires 3 hours charging time to
reach full capacity.
5. When charging is completed, squeeze release tabs on
battery pack and remove pack from charger.
6. lign exterior shape of battery pack with exterior
shape of the hous ing of tool as shown. Squeeze release
tabs, insert battery pack into back of tool, and release
pressure on tabs so it locks in place.
The battery pack accepts only about 80% of its maxi-
mum charge capacity with its first charge; or, after pro-
longed storage it will also require additional time on the
first charge. However, after several charge and dis-
charge cycles, the batteries should be up to full charge
capacity and delivering maximum performance.
14
Publicité
