CM BANDIT BAN07505 Manuel D'entretien, D'opération Et De Pièces page 5

DESCRIPTION
The CM Bandit hand operated lever hoists are highly versatile tools that can be used in any position to efficiently pull, lift, drag, or stretch.
The frame, covers and lever are made from steel stampings. The gears are heat treated steel, upper and lower hooks are forged steel and the
chain is heat treated, welded link type.
Hoist with load ratings of 3/4 and 1½ tonne are available and this manual applies to these units. The hoists are available with 5, 10, 15 and
20 foot lifts.
Hooks with latches are standard on all units.
The CM Bandit hand operated lever hoists are built in accordance with the specification contained herein and at the time of manufacture
complies with the applicable sections of the American Society of Mechanical Engineers (ASME) Standard B30.21: Manually Operated
Lever Hoists.
SPECIFICATIONS
B
A
B
Figure 2 – Specifications
Lift or
Load Rating
Model No. Reach
(Tonnes)
(ft)
BAN07505 5
BAN07510 10
BAN07515 15
0.75
BAN07520 20
BAN075LCX –
BAN15005 5
BAN15010 10
BAN15015 1.5 15
BAN15020 20
BAN150LCX –
F
G
H
C
C
Lever Pull Net
to Lift Rated Weight
A B
Load (lbf) (lb)
13.6
15.7
18
45 12.80 0.94
20.1
9.7
20.7
24.3
64 27.9 14.20 1.13
31.5
16.4
(ENGLISH)
J
K
L
D
D
Dimensions (in)
C D E F
1.13 0.69 9.63 4.88
1.25 0.81 10.25 5.63
3
E
G H J K L
2.19 3.31 6.06 2.11 3.95
2.38 3.56 6.75 2.69 4.13
MANUAL Number: BAN