Ariston Chaffoteaux elco MGM 2 ZONE CHAUD/FROID Installation Et Mode D'emploi page 28

Technical features
The plumbing module is designed to control multi-temperature systems divided
into two zones, one of which is direct and the other mixed, either in heating or cool-
ing mode.
The plumbing module is equipped with:
- a three-way motorized mixing valve,
- two low-consumption modulating circulation pumps.
The plumbing module may be installed independently as regards its plumbing func-
tions.
The plumbing module must be installed in combination with heating/cooling sys-
tems with heat pump or hybrid systems that support it, and connected to these via
a bus cable as described below.
The module's parameters can be set with the included system interface.
The system is not designed for installation with other types of products.
Model name
Conformity
3-way thermostatic mixing
valve
Circulation pump
Power supply voltage/frequency
28 - EN
Name or trademark
Model
Power supply
Opening/closing temperature
Connector
Type
Power supply
Maximum current
MGM 2-ZONE
HOT/COLD
Honeywell
VC6982-11
230 VAC 50/60 Hz
120 sec
Molex
PWM modulating
230V AC 50 Hz
0.66 A
230V AC 50 Hz