Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
STEP 7
Insert the Lift Arm
into the Carrier
2
and insert the Clevis Pin
17
Carrier and lock by fastening the Hair Pin
the Clevis Pin.
STEP 8
Slide the Wheel Pad Lift Arms
sides of the Lift Arm
and secure with
2
Push Pins
.
16
NOTE: The Wheel Pads can be moved in or
out to fit different mower widths. Use the
configuration that works best with your
model of lawn mower.
NOTE: The Safety Straps must
be used during operation
(see Step 9 of the Operating
Instructions).
WARNING: Wheel pads must be equal distance from the Lift Arm to maintain proper balance.
For additional information, see see Step 6 of the Operating Instructions.
THIS COMPLETES ASSEMBLY.
8
through the hole in
to
18
6
onto both
6
Wheel Pad Lift Arm
Hair Pin 18
Lift Arm 2
Lift Arm 2
Push Pin 16
Carrier
17
Clevis Pin
16
Push Pin
Wheel Pad Lift Arm 6
Publicité
Table des Matières
