Craftsman CMKGAAV45099000 Guide D'utilisation page 16

ENGLISH
Preparing for Storage (Steps 16 - 20)
STEP 16
Removing the Wheel Pads
• Remove Push Pins and
pull the Wheel Pad
Lift Arms out of the
Lift Arm.
• Store the Push Pins
in the Lift Arm to
prevent loss.
STEP 17
Removing the Lift Arm
• While holding the Lift Arm, remove the
Hair Pin and Clevis Pin from Lift Arm.
• Slide the Lift Arm out of the Carrier.
• Store the Hair Pin and Clevis Pin in the
Lift Arm to prevent loss.
STEP 18
Raise Carrier
• Raise the Carrier by turning the Crank Handle clockwise
until the Carrier Locking Handle drops into the top Tower
Hole.
16
Push Pin
Wheel Pad Lift Arm
Lift Arm
Push Pin
Hair Pin
Lift Arm
Wheel Pad Lift Arm
Carrier
Clevis Pin
Top Tower Hole
Carrier
Locking
Handle