Craftsman CMKGAAV45099000 Guide D'utilisation page 10

ENGLISH
Preparing for Use (Steps 1 - 7)
STEP 1
Unfolding the Mower Lift (if not applicable, skip to Step 2)
• Remove Hair Pin and Clevis Pin from the Wheel Frame.
• Remove the Tower out of the Wheel Frame.
• Rotate Tower 180 degrees and insert into Wheel Frame.
• Secure the Tower to the Wheel Frame by inserting
Clevis Pin and Hair Pin.
STEP 2
Installing Lift Arm
• Insert the Lift Arm into the Carrier and insert
the Clevis Pin through the hole in Carrier and
lock by fastening the Hair Pin to the Clevis Pin.
10
Clevis Pin
Clevis Pin
Hair Pin
Lift Arm
Hair Pin
Tower
Hair Pin
Carrier
Clevis Pin