Operating Instructions - TCL Sweeva 6000 Manuel D'utilisation

EN

Operating Instructions

Power on/off
Press and hold the
machine.
Press and hold the
machine.
Start cleaning
Press the button to start the automatic cleaning mode.
After starting, the robot vacuum will leave the charging
dock,
automatically scan to generate a map, intelligently determine
its cleaning path, and divide the space into multiple zones. The
cleaning path will be planned along the wall, and then the
robot vacuum will conduct cleaning back and forth in a "bow"
shape to complete the cleaning of each zone one by one.
button for 3 seconds to turn on the
button for 3 seconds to turn off the
Start cleaning
If the battery is too low, the cleaning cannot be started,
please charge first and then start the cleaning.
Before cleaning, all cables on the floor shall be organized to
avoid power interruption or damage to items caused by
pulling the power cord during cleaning.
In automatic cleaning mode, if the set cleaning time is less
than 10 minutes, it will conduct cleaning twice by default.
Do not move the charging dock during cleaning, and make
sure that the charging dock is powered on, otherwise the
robot vacuum may not be able to return for charging.
1 8