NEC MultiSync LCD1970GX Mode D'emploi page 13

Controls
–continued
OSM ® Warning: OSM Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there is no signal present. After
power is tuned on or when there is a change of input signal or video is inactive,
the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning if the monitor is using a
resolution other than the optimized resolution. After power is turned on or when
there is a change of input signal or the video signal doesn't have proper resolution,
the Resolution Notifier window will open. This function can be disabled in the
Menu Tools.
OUT OF RANGE: This function gives a recommendation of the optimized resolution
and refresh rate. After the power is turned on or there is a change of input signal or
the video signal doesn't have proper timing, the Out Of Range menu will appear.
11
15503782-LCD1970GX(A)-content Page 11 2/2/2005, 7:50 PM Adobe PageMaker 6.5C/PPC