Sygonix 1677715 Mode D'emploi page 4

Inserting the microSD card
The microSD card must be formatted (see the following section).
The product only supports Class 10 microSD cards with a capacity of 4 to 128 GB.
The card may only be inserted or removed while the product is turned off. Otherwise,
the product and card may be damaged.
Do not use force when inserting the card. Only one orientation is correct.
• Rotate the camera so that the lens faces upwards.
• The contacts of the card must point downwards. Gently slide the card into the slot until it
stops. The card must click into place.
• In order to remove the card, press slightly inwards. The card is then released and can be
removed.
Formatting microSD cards
You may format the card using the card reader on your computer. Select the format
FAT32. Refer to the documentation that came with your operating system.
Formatting the card will permanently delete any data already stored on the card.
You can also format the card in the product. Proceed as follows:
• Insert the card into the product. Turn the product on.
• Press and hold the REC/RESET and WIFI buttons at the same time for about 5 seconds. The
LED next to the card slot flashes blue and yellow. The card is now being formatted.
• As soon as the LED goes out, formatting is complete.
Recording videos manually
• In standby mode, press the REC/RESET button. The LED flashes blue 3 times and then goes
out. The product now begins recording a video.
• To stop recording, press the REC/RESET button again. The video is automatically saved to
the memory card.
If you begin recording a video at a lighting level of <10 lux, the product will shoot a
night-vision video in black/white.
If the card is full, the oldest video will be automatically overwritten.
View/copy/delete files
• Remove the card from the product.
• Insert the card into the provided card reader.
• Connect the card reader with a computer.
• The card will appear as a drive. Now you have access to all the files that are stored on the
card.
• Safely eject the card via the operating system before disconnecting the card reader from
the computer.
Restoring the default settings
If the product does not record a video or otherwise does not respond, press and hold the REC/
RESET button for 5 seconds to reset the product to the default factory settings.
Mounts
a) Magnetic base
• The magnetic base consists of the following parts:
- Black plastic base with magnetic ball
- Magnetic ring
- Black rubber disc
• Insert the black rubber disc into the magnetic ring. Then place the ring on the magnetic ball.
• Place one magnetic plate on the ring.
• Place the camera on the magnetic plate.
Use the double-sided tape to attach the base to a vertical, smooth surface as
needed.
Two spare stickers are included in the delivery for the event that the sticker comes
loose from the magnetic plate.
b) Magnetic clip
Use the magnetic clip to attach the camera to your clothing or other suitable mounting points.
LED status display
LED indicator
Lights up blue
Lights up red
Flashes blue 3 times and then goes out
Flashes slowly yellow
Flashes yellow and then goes out
Flashes blue and yellow and then goes out
Care and Cleaning
• Disconnect the USB cable from the product before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions as these can
damage the housing or impair the product function.
• Do not immerse the product in water or other liquids.
• Use a dry, lint-free cloth to clean the product.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to Directive 2014/53/EU.
Click on the following link to read the full text of the EU Declaration of Conformity:
www.conrad.com/downloads
Select a language by clicking on the corresponding flag symbol, and then enter
the product order number in the search box. The EU Declaration of Conformity is
available for download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the
environment.
Technical data
Rechargeable battery ................... LiPo, 240 mAh
Charging time ............................... 50 min
Operating time .............................. max. 1 h (in daylight)
Resolution ..................................... 960p
Frame rate .................................... 30 fps
Video format ................................. AVI
Viewing angle ............................... 55° (horizontal), 42° (vertical)
Night vision distance ..................... 3 m
Motion detection distance ............. 5 – 8 m
Recording time ............................. 1 min per file (motion detection)
2 min per file (manual recording)
Focal length .................................. 3.5 mm
WiFi standard ............................... 802.11b
WiFi range .................................... max. 50 m
Wireless frequency ....................... 2400 - 2483.5 MHz
Transmission power...................... 1.5 dBm
Operating/storage conditions ........ 0 to +50 °C, max. 85 % RH
Dimensions (W x H x D) ............... 24 x 24 x 24 mm
Weight .......................................... 23 g (without mount)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical state at the time of printing.
Copyright 2018 by Conrad Electronic SE.
Meaning
Standby mode
Battery is charging
Manual video recording
Pair with mobile phone
Connect with WiFi
Memory card is being formatted
*1677715_v2_1118_02_IPL_m_en