Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
Micro WLAN HD camera
Item no. 1677715
Intended use
The product is used for the recording of videos. The integrated infrared LED enables recordings
in darkness. The files are saved on a microSD card (not included). Power is supplied via the
built-in rechargeable battery.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not convert and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Only pass this product on to third parties
together with the operating instructions.
This product complies with statutory, national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Camera
• Magnetic base (3-part)
• Magnetic clip
• USB cable
• MicroSD card reader
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the
product.
Safety instructions
Read the operating instructions and safety information carefully. If you do not
follow the safety instructions and information on proper handling in these
operating instructions, we assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the warranty/guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe safety and operating instructions of any other devices which are
connected to the product.
• Do not perform surveillance of any persons without informing them beforehand.
Observe the respective laws of your country.
• Double-sided tape
• 2 x magnetic plate
• 2 x sticker
• Operating instructions
• Store the product away from other magnets and magnetic metal parts.
Keep an appropriate distance (at least one metre) to devices and objects that can
be destroyed or influenced in their function by magnetism (e.g. magnetic tape
stripes, EC cards, discs, identifiers, hard discs, computers, monitors, measuring
devices).
The magnetic field of the integrated magnet may substantially influence the
function of pacemakers or other medical devices! Therefore, keep the product
away from such devices.
Be especially careful in the use of magnets to prevent injury and to prevent
destruction of the magnet.
Keep magnets in a place inaccessible to children. Keep magnets out of reach of
children.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be done by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Battery
• The rechargeable battery is built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable
battery may cause it to explode or catch fire! Unlike conventional batteries (e.g.
AA or AAA batteries) with a thin sheet metal case, the case of the LiPo battery is
made of a sensitive plastic film.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into open flames. This may cause a fire or explosion!
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the battery before recharging it.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is
normal that a certain amount of heat is generated during charging.
Operating elements
1
10
9
8
7
6
5
Downloading the app
• Download the corresponding app on your smartphone or tablet in order to be able to use all
the functions of the camera (e.g. video recording triggered by motion detection).
• You can find the app under the name "Mini WiFi Cam".
• The app is available for iOS and Android devices.
To download the instructions for the app, scan the QR code on this page and follow
the instructions on the website.
Charging the battery
• Fully charge the rechargeable battery before initial operation.
• Connect the product via the provided cable to the USB port of a computer or a suitable mains
adapter with USB output (not included).
Permissible output voltage/current of the mains adapter: 5 V/DC, max. 1 A
• The red LED next to the card slot lights up during charging. The charging time is approximately
50 minutes.
• After charging, the LED switches off. Disconnect the cable from the product and from the
voltage source.
Recharge the battery as soon as the product no longer switches on.
Switching on and off
• Slide the on/off switch toward ON to switch the product on. The blue LED next to the card slot
lights up for 15 seconds. The LED then indicates the current status of the product (see table).
• To switch off the product, slide the on/off switch toward OFF. The LED turns off.
1 REC/RESET button
2
2 WIFI button
3 On/off switch
4 USB socket
3
5 Photo resistor
6 Magnet
4
7 Camera lens
8 MicroSD card slot
9 IR LED
10 Microphone
Publicité
