Operator's Panel - Greenlee 5990A Manuel D'instructions

Instrument Description (cont'd)

Operator's Panel

The operator's panel is shown in Fig. 2 below.
1
2
3
Legend:
1...........Ω: Press to switch to Insulation Measurement Mode. Press again to set a resistance
limit value.
2.......... V: Press to switch to Voltage measurement mode.
3.......... Light: Press to to turn the display backlight ON or OFF.
4.......... t cursor: Press to decrease the test voltage parameter or resistance limit value.
5.......... u cursor: Press to increase the test voltage parameter or resistance limit value.
6.......... START/STOP: Press to start or stop insulation measurement.
7.......... ON/OFF: Press to switch the instrument ON or OFF.
8
LCD
4 Keypad
Fig. 2. Front Panel
5990A
5
6
7