Repair And Maintenance - VWR VisiScope 100POL Serie Manuel D'utilisation

Repair and maintenance

Microscopy environment
This microscope is recommended for use in a clean, dry and shock free environment with a temperature of
0-40°C and a maximum relative humidity of 85 % (non condensing). Use a dehumidifier if needed.
After using the microscope
The microscope should always be kept vertical when moving it so that no moving parts, such as the
eyepieces, fall out. Never mishandle or impose unnecessary force on the microscope.
Never attempt to service the microscope yourself.
After use, turn down the illumination intensity control and turn the light off. Cover the microscope with included
the dust cover, and keep it in a dry and clean place.
Electrical safety precautions
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the
operation voltage of the equipment and that the lamp switch is in off-position.
Users should observe all safety regulations of the region. The equipment has acquired the CE safety label.
However, users do have full responsibility to use this equipment safely.
Cleaning the optics
If the optical parts require cleaning first use compressed air.
If that is not sufficient use a soft lint-free cloth with water and a mild detergent.
And as a final option use the piece of cloth moistened with a 3:7 mixture of ethanol and ether.
Note: ethanol and ether are highly flammable liquids. Do not use them near a heat source, near sparks or
near electric equipment. Use these chemicals in a well ventilated room.
Remember to never wipe the surface of any optical items with your hands. Fingerprints can damage the op-
tics. Do not disassemble objectives or eyepieces in an attempt to clean them.
For the best results, use the VWR cleaning kit (see catalogue number below).
If you need to send the microscope to manufacturer for maintenance, please use the packaging if possible
packaging.
User replaceable accessories and spare parts
DESCRIPTION
H5x eyepiece
WF10x/18mm eyepiece
WF16x/12mm eyepiece
WF10x/18mm micrometric eyepiece
Achromatic objective 4x/0.10
Achromatic objective 10x/0.25
Achromatic objective 20x/0.40
Achromatic objective 40x/0.65
Achromatic objective 60x/0.85
Achromatic objective 100x/1.25 (oil)
Polarising set (filters only)
Dust cover, type 3
Solar battery pack
Attachable mechanical stage
Cleaning kit
QUANTITY
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
9
CAT. NO.
630-1624
630-1625
630-1626
630-1627
630-1628
630-1629
630-1630
630-1631
630-1632
630-1633
630-1635
630-1636
630-1637
630-1634
630-1803