Watts Electronics Vision WiFi Manuel D'utilisateur Et D'installation page 8

MAIN MENU
Press to go to main menu
1
5
① Energy consumption statistics menu.
② Language (the flag of the current language is
displayed).
8 languages are proposed. If you want to select another
language, you need to insert the software (available on
www.wattswater.eu.) on a microSD then select 8 new
languages.
③ General commands menu.
Use this menu to put all the same devices type in the same
operating mode.
a
To select the
a
heating/cooling devices
mode for all the
installation.
To select the ON/OFF
b
devices mode for all the
installation
To select the lighting
c
devices mode for all the
installation.
To validate the selections.
d
④ Heating/cooling mode management menu.
See section "Heating and cooling control"
⑤ User settings menu.
In this menu, you can set:
- Time, Date (Manual, Automatic).
- Time zone (UTC) if the device is in automatic time update
mode
- Time and date if the device is in manual time update mode
- Summer-Winter (Manual, Automatic).
3
2
6 7
d
b c
- Temperature unit (°C, °F).
- Background Color.
- Buttons color
- Backlight
- Screen saver (Enabled, Disabled).
- Default screen (Home, Clock, Disabled)
- Screen cleaner.
- Factory default user (interface).
4
⑥
WIFI menu.
Reading button (refreshment).
8
The Internet Access password allows to link your central unit to
your Internet account (See below) for a remote control of your
system through the Internet or Smart Phone.
n.b.: At first use or software update, wait for some time until the
green State icon is active.
⑦
Holidays menu.
- To set the departure/return dates and time.
- Use < or > to select year/month/day, hour & minute.
- Set and validate the operating mode of the devices in holiday
mode. (Same menu then general commands menu).
⑧ Installation menu (long press 3-4 s)
8
A
B
C
D
E
F
G
H
I